Why Is Regular Furnace Cleaning and Maintenance Necessary?

Most homeowners adhere to a tight maintenance routine to keep their houses clean and in good condition, but they may overlook one vital aspect. The HVAC system is one of the essential aspects of a home that everyone forgets until it breaks down, and there is a hefty bill to pay for restoring its operation.

If you haven’t called the furnace service in Phenix City, schedule the maintenance service before the winter begins

Why Should You Clean Your Furnaces?

When the furnace operates to warm up the indoors, it draws dust, filth, and other particles. These components are circulated in your home through the furnace if you do not regularly clean your furnace.

It can cause a rise in health concerns, but it may also increase indoor dust. A dusty and allergen-filled home environment may aggravate pre-existing health issues such as asthma, allergies, and other respiratory issues.

Failure to complete regular furnace cleaning may also influence its functioning. The furnace may stop operating if you wait too long between maintenance and cleaning appointments because of overheating due to excessive dust.

Signs Your Furnace Needs Cleaning/Repair

Aside from a regular cleaning and maintenance program, there are certain signals that your furnace needs to be cleaned. Paying attention to the furnace’s performance and operation guarantees that it does not break down when you need it the most.

Here are some signs:

  • Reduced Airflow

If the airflow created by the furnace’s heating system does not feel as powerful as it should be, it is recommended to get it checked out before a minor problem becomes serious. A simple cleaning may occasionally remove particles, and dust obstructing airflow and prevent these contaminants from compromising the overall system.

  • Dripping Ducts

If you’re changing the filters in your heating system and discovering that the air ducts feel moist, you could have a bigger problem. Cleaning and maintaining the furnace may help guarantee that moisture droplets do not create mold conditions. In many cases, the system merely has to be cleaned but having it checked out by an expert guarantees that there is no severe issue with your furnace.

  • Gas Odors

If you smell gas coming from your furnace or detect a smell in the air when you switch it on (distinct from the odors that signal the system hasn’t been used in many months), turn it off immediately and schedule a maintenance appointment.

  • Strange Sounds

If you switch on your furnace and hear any banging or scraping, it’s time to get your system maintained. Blockage in the pipes or the furnace might be the problem’s source. However, the problem might be more severe, so if you are searching for an HVAC service near me, hire a professional one.

  • High Heating Costs

Your heating expenditures should be quite stable for the most part. If your bill suddenly increases, you should get it evaluated for any underlying faults causing the furnace to run more often than normal.

Routine cleaning and maintenance visits may help to avoid some of the furnace problems by detecting them before they become a problem. It is just another reason why following a furnace cleaning routine is necessary.

Priority Heating and Air is one of the best HVAC services you will get near Phenix City, and it will save you time and money on more costly future repairs. Call (334) 297-9820 and schedule an appointment.

7 Furnace Efficiency Tips To Save Money And Energy

A common misconception among homeowners is that there is no way to significantly reduce the amount of energy their furnace consumes. However, you can take several actions to reduce energy usage. Implementing a few tips for enhancing the furnace’s efficiency may keep your home warm and comfortable while lowering your power expenditures and furnace service.

For more information, get in touch with Priority Heating and Air in Phenix City for more information about our furnace services.

Tips to Improve The Efficiency of Your Furnace

  • Set The Thermostat’s Temperature

It is necessary to find the ideal temperature. You might save hundreds of dollars on your annual heating expenses by dropping your home’s temperature by 10 to 15 degrees Fahrenheit or when you are away. When you have a programmable thermostat, you may set up a heating program depending on your specific schedule.

  • Observe Caution About The Outdoor Unit

Leaves can clog the compressor during the fall and winter months. The material used in landscaping will influence the heating efficiency in various ways. If debris is present, airflow through the system is impeded.

  • Change The Air Filters Regularly

Many people believe that the major function of the air filter is to improve indoor air quality. Still, in actuality, it also serves to protect the heater from damage. However, when the filter is obstructed, it does more harm than good since it blocks air from passing through the system. Clean or change the furnace filter every month with the help of one of our technicians. If you are in the process of searching for a reliable HVAC service near me online, look no further than Priority Heating and Air.

  • Install a Cover on The Air Ducts

Damaged air ducts in your home may cause an estimated twenty percent loss of the warm air circulated throughout the property. However, you can resolve this issue instantly by simply sealing the air ducts in your home. It will restrict the escape of air. Sealing the air ducts will help you save money on heating costs while increasing the efficiency of your furnace.

  • Get Fall Furnace Maintenance

Seasonal HVAC system maintenance can increase energy efficiency by up to 40 percent. You can prevent up to 95 percent of furnace problems and repairs with regular heating system maintenance. A heating system that receives routine maintenance and furnace service will last longer than one that does not. Contact Priority Heating and Air in Phenix City, for premium services at competitive rates.

  • Consider Zoning Systems

There are times when the furnace is inefficient, even though everything else has been performed appropriately. When your home’s HVAC systems are zoned, different rooms can be heated or cooled to varying degrees. It gives you greater control and increases the furnace’s efficiency.

  • Insulation is Necessary

Even with older HVAC systems with effective seals, ductwork is often not insulated, resulting in significant heat loss. Insulating ductwork is a type of home improvement that produces immediate results in better room comfort and long-term savings on utility expenses.

Conclusion

In addition to scheduling a regular furnace tune-up with Priority Heating and Air, there are several other ways to improve the efficiency of the HVAC systems. We will help your furnace operate more efficiently during the fall and winter months if you follow the procedures above. If you are looking for HVAC service near me online, contact us!

7 Benefits Of Furnace Maintenance & Tune-Up

Many homeowners often ignore servicing and necessary annual furnace maintenance until a sudden problem arises and the system breaks down. If you are one of those people who do not take servicing or furnace tune-ups seriously, please continue reading for more information to know why tune-ups are essential. 

Reasons Why Furnace Maintenance and Tune-Up are Necessary

1. Reduced Energy Bills

A furnace determines your energy bill. It can make up to 50% of your bill, depending on how much you use the system. According to experts, having a well-tuned furnace can save up to 30% on your bills, as it will increase the energy efficiency of your unit. 

2. Prevent Breakdowns and Repairs

A broken heating system can be inconvenient for everyone. Routine maintenance will ensure that your HVAC is in top condition. If you have any queries related to your heating and cooling system or need to schedule any service like heater replacement Phenix city, contact Priority Heating and Air and schedule your furnace tune-up to ensure everything is working properly.

3. Extend The Unit's Lifespan

Maintenance and tune-ups keep your furnace in its peak working condition, providing you with the best comfort. The better you clean, maintain, and care for your furnace, the longer it will last. A furnace is an expensive investment, and by extending the lifespan of your unit with tune-ups and maintenance services, you will be able to get the most out of it. 

4. Better Air Quality

Furnace maintenance can help you improve the air quality of your home, preventing respiratory problems, especially if there are asthma patients in your home. Change the furnace filters regularly to prevent dirt, dust, and debris buildup. 

5. Maintain The Warranty

Regular tune-up service for your furnace will help maintain the manufacturer’s warranty. On most furnaces, you can get a ten years warranty. To ensure your furnace qualifies for the warranty, you must maintain regular maintenance and tune-up. If any problem arises and you need to claim the warranty, you must show the service records to prove that the required maintenance has been done. 

6. Detect Leaks

A problem in the furnace can result in a gas leak; needless to say, and it is very dangerous. There is a risk of carbon monoxide leaks if your furnace is left unchecked. The leaks pose safety risks and are hard to detect as the gas is colorless and odorless. Annual maintenance will catch any potential safety risks, giving you peace of mind that everything is working fine. 

7. Stay Warm and Safe

By getting the furnace tune-up before winter, you can ensure that your furnace will work efficiently and smoothly throughout the season. A broken-down furnace is the last thing any homeowner would want in the middle of a cold night. You will also know about the condition of your furnace before the winter arrives, giving you plenty of time to set everything right. 

Conclusion

If you have any queries related to your heating and cooling system or need to schedule any service like heater replacement Phenix city, contact us at Priority Heating and Air for the best quality assistance and solutions. 

How Much Time Does a Furnace Take to Get Installed?

Installation of a furnace ranges from high-end places to some highly crowded places. You can have a fair estimate on how long the furnace installation will take by looking at the enormity of the place.

Some of the Most Common Places for an Installation Are:

● Basements
● Attics
● Laundry rooms
● Garages
● Factories

Factors that Show How Much Time an Installation Requires:

There are a variety of factors that highly affect the installation of a furnace and decides on how long is it going to take for the same:

  • The Size of the Building
    This factor will primarily regulate the size of the furnace, which will further regulate the time taken to install the furnace. The larger the area, the lengthier the time.
  • The Kind of Installation Which is Required
    The kind of furnace that is to be installed also highly determines the time that the entire installation process will take. For example, if an air conditioner needs to be installed at your residence, the time consumed will be extremely minimal. But, if a centrally located air conditioner needs to be installed in a restaurant, you can take professional help from Heater installation Phenix city.
  • The Kind of Unit Which is Required
    This factor is a continuation of the above. In this case, if the unit is pre-installed, the time consumed would be very minimal compared to the installation of both; the furnace and the unit.
  • The Location of the Installation
    As mentioned, this factor will make or break the time you spend installing the furnace. In this case, the type of furnace installed, natural gas, oil, electric, propane, also makes a big difference. It is also important to know what location complies best with the kind of furnace.
  • The Time Frame for a Furnace Installation Ranges from 4-8 Hours
    If you are looking to install a furnace at your home, you need not worry about spending an entire day doing that. Simply 4-8 hours can have your work be smoothly completed.
    Nevertheless, installing a furnace may be a tedious and complex task as it might want you to sweat a little extra on that gas line, duct line, or electricity supply.
    Now, if you are looking to install a furnace in a much larger space, for example, a factory, it is naturally going to take longer. The timings for that vary from 4-10 hours depending on the complexity of the additional products that need to be installed to fit a furnace successfully.

How and When Would a Furnace be Required to be Re-Installed or Replaced?

You are required to replace a furnace only in case of any failure in the duct system, which is not usually happening in small spaces like a residence. Nevertheless, if you make it to the odds, you need not worry.

Heater installation Phenix city will help you replace or install a brand-new furnace and will take much less time. It would have taken even less time, but re-installing a new duct system might be a little flustering.

You can contact the relevant HVAC service near me to experience a smooth furnace installation process. You can also visit the Priority Heating and Air services. You can also experience a tip-of-the-finger service by calling (334) 297-9820.

How Do You Know What Kind Of Furnace Do You Have?

Furnaces are age-old heating units that have been serving most American households during winters. All thanks to their low operating noise, high energy efficiency, and long lifespans. In addition, furnaces can be easily installed in every type of house.

However, many homeowners are not aware of the type of furnace installed. That’s right; a furnace can be of various types depending on the energy source. If you are not sure about the type of furnace at your home, you might consult a professional heater installation in Phenix City.

Meanwhile, here is a little guide on the three major types of furnaces available in the market.

3 Different Types of Furnaces

  • Gas Furnace
    The most common type of furnace you can find in houses is the gas furnace. Also known as a natural gas furnace, this heating unit uses gas coming from the municipal line.
    The furnace is equipped with gas jets that operate along the burner ignite to create the hot combustion gas. This eventually raises the temperature of the air, which is then circulated in the house by the fans. Gas furnaces are pretty effective at creating and distributing heating evenly and do not cost much to run. The primary reason behind its low operating cost is the low prices of gas compared to other fuels.
    However, if you experience cold spots much often, you might need to contact a professional HVAC service near me.
  • Oil Furnace
    Not every household can have access to natural gas pipelines. In such cases, you might have an oil furnace. If you are situated in cold environments such as the northeastern United States, you most probably have an oil furnace. As the name suggests, oil furnaces use oil as a fuel to produce heat.
    However, keep in mind that oil furnaces are less energy-efficient than gas furnaces. A typical AFUE rating for oil furnaces is around 80-90 percent, whereas, for gas furnaces, it is about 88-98 percent.
  • Electric Furnace
    If you don’t have a natural gas line connected to your house, you can contact the heater installation in Phenix City for an electric furnace. This heating system is an electrically powered furnace in which electricity is converted into heat and transferred to the air. Electric furnaces are also quite inexpensive and compact as compared to other furnaces, making them easy to fit into small living spaces as well. However, like oil furnaces, electric furnaces are usually a lot less efficient than gas furnaces. Nevertheless, they can be a perfect fit for many households depending on the scenario.
    Heat pumps emerge as a great alternative to furnaces. This HVAC unit also runs on electricity and can heat and cool your home. If you are located in a mildly cold region, you can enjoy warm and comfortable winters with a heat pump alone!

So, if you think you need a new furnace or a replacement, you can trust us. We provide the best heating installation, service, replacement, and HVAC repair near me.

Call us today at (334) 297-9820 to schedule a service!

How to Read Your Furnace Model Number?

We often buy things without bothering much about the model number or a serial number of that thing. But have you ever wondered what secrets or information the model number can tell about your product? When it comes to furnaces, it becomes important to check the model number so that you can keep track of all the information on it. The model number of a furnace can vary according to the company or the type of the furnace. The model number can also determine a lot of information about the product which we might have missed during the purchase of the product.

The model number of a furnace is divided into different parts which can tell different things about your product. However, the model numbers can be encoded differently by different companies which can tell you different things about the product. Generally, the serial number can be like G26Q3/4-100-1 or it can be a ten-digit number like 1404123456.

These Things Can be Easily Determined Using the Model Number –

 

  1. Series Number

    The first three digits, that is G26 in the above example can tell us about the series number of the product. G here stands for Gas and 26 means 26th unit produced in the lot.

  2. Unit capacity or Size

    The next three digits, that is Q3/4 can tell you about the capacity and size of your furnace unit. Q3/4 here refers to 3-ton or 4-ton unit capacity. There is 400 CFM(cubic feet per minute) of airflow per ton. This means that the capability of the air movement of a particular unit is 1200/1600 CFM.

  3. Age of the Unit

    Some furnace models of a particular company like Goodman can also tell you about the age of your unit by telling in which month and year the unit was manufactured. For example in model number 1404123456, the first four digits, that is 1404 tells you that this unit was manufactured in April 2014. Some companies like Lennox tell you about age by using alphabets where A stands for January, B stands for February, and so on.

  4. BTU Rating

    BTU (British Thermal Unit) rating is the rating in thousands that determines the efficiency of the unit. In the above example, 100 refers to the BTU rating which is 100,000. This furnace has an input of 100,000 BTUs. Output depends upon the efficiency of the furnace. If this furnace is 90% efficient so the output will be 90,000 BTUs.

  5. Revision (Dash) Number

    The last number shows the number of revisions that have been made to the model series. This number indicates the revision has occurred to the model series not requiring a series change. This revision number is very important in repair part identification.

Sometimes, model numbers can also tell you a lot of things about the things we purchase but we didn’t pay attention to while purchasing. Different types of furnaces from different companies have different data on their model or serial numbers. If we know how to properly read the serial number of the furnace, we can easily determine many things about it by ourselves.

You can also check out Priority Heating and Air for getting the cheapest heater repair in Phenix City. They also provide the best furnace repair and service in Phenix City. Their team is available 24×7 and they have professionals who are experts in their fields and provide the best service.