Why Is Regular Furnace Cleaning and Maintenance Necessary?

Most homeowners adhere to a tight maintenance routine to keep their houses clean and in good condition, but they may overlook one vital aspect. The HVAC system is one of the essential aspects of a home that everyone forgets until it breaks down, and there is a hefty bill to pay for restoring its operation.

If you haven’t called the furnace service in Phenix City, schedule the maintenance service before the winter begins

Why Should You Clean Your Furnaces?

When the furnace operates to warm up the indoors, it draws dust, filth, and other particles. These components are circulated in your home through the furnace if you do not regularly clean your furnace.

It can cause a rise in health concerns, but it may also increase indoor dust. A dusty and allergen-filled home environment may aggravate pre-existing health issues such as asthma, allergies, and other respiratory issues.

Failure to complete regular furnace cleaning may also influence its functioning. The furnace may stop operating if you wait too long between maintenance and cleaning appointments because of overheating due to excessive dust.

Signs Your Furnace Needs Cleaning/Repair

Aside from a regular cleaning and maintenance program, there are certain signals that your furnace needs to be cleaned. Paying attention to the furnace’s performance and operation guarantees that it does not break down when you need it the most.

Here are some signs:

  • Reduced Airflow

If the airflow created by the furnace’s heating system does not feel as powerful as it should be, it is recommended to get it checked out before a minor problem becomes serious. A simple cleaning may occasionally remove particles, and dust obstructing airflow and prevent these contaminants from compromising the overall system.

  • Dripping Ducts

If you’re changing the filters in your heating system and discovering that the air ducts feel moist, you could have a bigger problem. Cleaning and maintaining the furnace may help guarantee that moisture droplets do not create mold conditions. In many cases, the system merely has to be cleaned but having it checked out by an expert guarantees that there is no severe issue with your furnace.

  • Gas Odors

If you smell gas coming from your furnace or detect a smell in the air when you switch it on (distinct from the odors that signal the system hasn’t been used in many months), turn it off immediately and schedule a maintenance appointment.

  • Strange Sounds

If you switch on your furnace and hear any banging or scraping, it’s time to get your system maintained. Blockage in the pipes or the furnace might be the problem’s source. However, the problem might be more severe, so if you are searching for an HVAC service near me, hire a professional one.

  • High Heating Costs

Your heating expenditures should be quite stable for the most part. If your bill suddenly increases, you should get it evaluated for any underlying faults causing the furnace to run more often than normal.

Routine cleaning and maintenance visits may help to avoid some of the furnace problems by detecting them before they become a problem. It is just another reason why following a furnace cleaning routine is necessary.

Priority Heating and Air is one of the best HVAC services you will get near Phenix City, and it will save you time and money on more costly future repairs. Call (334) 297-9820 and schedule an appointment.

8 Signs That Your Heating System Needs Repair Or Replacement

A heating system is required to keep you warm and safe during the winters. Having a healthy heating system can help you dodge the cold and provide you with good air quality, which will enhance your living standards. A heating system problem may arise at any given time if you do not take care of it properly. Heating systems issues can be fatal and should be addressed immediately. With proper maintenance of your heating system, you can dodge these issues and increase the lifespan of your system. A few indicators for servicing or heater installation Phenix city of your heating system are as follows:

  1. Frequent Changes in Temperature

    If your heating system does not provide adequate heating and needs to be adjusted from time to time, it might indicate that the system needs to be replaced. Old heating systems fail to provide adequate heating throughout the home and must be inspected regularly to avoid heavy maintenance costs.

  2. Unusual Sounds

    If your heating system is making unusual and weird sounds, it is an indication that you require a heater repair in Phenix city immediately. If your heating system is in good condition, it should not produce any weird sounds while operating. These unusual sounds may be the reason for major damages to the heating system and should be fixed immediately.

  3. High Energy Bills

    If not maintained efficiently, an old heating system may not be as energy-efficient as before. Regular maintenance of the heating system can help you keep your energy bills under control. The decreased efficiency indicates that you need heater repair in Phenix City.

  4. Improper Heating

    If your system does not provide you with proper heating throughout your home, you should consider calling an experienced technician to inspect and repair your system. The heating system should maintain the same temperature throughout the house and provide adequate heating.

  5. Mediocre Indoor Air Quality

    If your heating system fails to provide you with enhanced air quality, there may be a problem with the air filters. Clogged filters need to be replaced immediately. Maintaining good air quality is required to keep yourself and your loved ones safe from allergies and other air-borne diseases at all times.

  6. Frequent Repairs

    If your heating system requires frequent repairs every few months, it is an indicator that you should consider replacing your heating system. Frequent heater repair Phenix city indicates that your system might break down at any point. Consider investing in a new appliance rather than spending huge amounts on repairs.

  7. High Condensation Levels

    If your heating system produces high condensation levels in your home, it is time for you to consider a replacement. If your system blows excess moisture, it can lead to other serious issues.

  8. Frequent Cycling

    A heating system should maintain a constant temperature unless there is a temperature shift. If your heating system is frequently cycling itself, you should consult an experienced technician.

You can contact Priority Heating & Air for all your heating system and air conditioner problems. Our team of expert professionals seeks to cater to the needs of all our clients and provide them with top-notch quality services. You can give us a call at (334) 297-9820 or leave an email at [email protected], and our team will get back to you soon.

Heater Not Working? Here’s How To Troubleshoot At Home

In case you’re wondering why your heater isn’t working, there can be a dozen reasons behind it. The reasons can range from a dirty air filter to clogged drain lines. Having warmth is essential in the cold climate of Arizona, and if your heater isn’t working, then it can get tough for you.

However, we are here to sort out your troubleshooting queries and help you with all your heater troubles! Keep reading to find out how to troubleshoot at home!

  • Check the Air Filters: If your furnace has a dirty air filter and is clogged with dirt, dust, and debris, then your furnace will stop blowing hot air. It will also stop working if the heat exchanger overheats at one point in time. It can also lead your furnace to increase electricity costs and can cause your furnace to run less efficiently.

You should replace your furnace’s air filters at least once in 90 days. Also, make sure to check them regularly if you have pets or live in a dusty area.

  • Clean the Drain Lines: It often happens in the heating season that your furnace releases and drains off a lot of water. However, if your condensate lines or drain pipes are filled with dirt and dust, the water can mix and result in slime, which blocks the airflow. To resolve this issue, try cleaning your drain lines thoroughly.
  • Check your Thermostat: Often, it’s your thermostat that is at fault. Newer models sometimes have thermostats that are sensitive to the slightest touch, altering the temperature. So, before calling in the HVAC professionals, check your thermostat and make sure that it’s correctly set.
  • Check the Gas Supply: If you have a furnace that is an older model, then it runs on gas. So, before looking for anything else, check your furnace’s gas levels. Locate the handle to the back of the furnace and see if enough gas is there. If not, then it’s time for a refill or to call the gas company.
  • Check the Ducts and Vents: If some parts of your house are getting heated while some aren’t, then check out your ductwork and ventilation. Also, check pipelines to ensure that none of them is blocked and isn’t restricting the airflow. If there are any leaks in the ducts or pipes, seal them off or call an HVAC technician to install new ducts.

These reasons are mostly behind your heater not working or not being able to heat. Apart from these, check the electrical wiring of your furnace, refrigerant levels, dirty burners or flame sensors, et cetera.

If you’re still facing trouble with your furnace and if it’s still not working, then you need to contact the best furnace service in Phenix City team, Priority Heating & Air. Also, we’re there 24*7 to keep your heater in top-notch condition! If you wish to make a booking/consultation, contact us on (334) 297-9820. 

5 Common Reasons The Heater Stopped Working

The heater is one of the most important components in your home during the winter. However, if you regularly put off maintenance and repair for an extended period, your heater may fail when you need it the most.

Even if you keep your appliances in good working order throughout the year, they are still prone to wear and tear. It’s the same with a heater, and we’ve all had problems with our heating systems at some point. The days are short, and the nights are getting longer. The winter season is here! The requirement for a properly functioning heater has become more apparent as the temperature has gradually dropped.

If your heater is not working properly, these could be the possible reasons:

1. Poor Airflow

Poor airflow or inadequate heat are two of the most prevalent heater issues. If your heater or blower isn’t blowing air as efficiently as it previously did, it might be due to a blocked or filthy filter. If this problem or the filter is not examined or left in its current state, the limit switch may be damaged. Replacing the limit switch after that can be costly. Thus it is recommended that you check the filter regularly and clean it as needed. Poor airflow and the need for repairs can be avoided with regular maintenance.

2. Faulty Thermostat

Thermostats are essential components of all types of room heaters. They are not only significant, but they are also necessary. It may be broken if your thermostat doesn’t switch on or adjust the heat mode. This can be a source of concern and should be investigated as soon as possible with expert assistance. It can be possible that you have not installed it properly. You should call a professional for heater repair in Phenix City in such a case.

3. Constant Blowing

Constant blowing is one of the most prevalent heater issues. A faulty limit switch might be the cause of your heater’s blower running continuously without switching off. It’s important to note that the blower should never run constantly and be switched off now and then. If this is not the case, get a furnace service in Phenix City.

4. Noise from the Heater

The majority of heater models on the market nowadays are silent and do not produce any noise. As a result, if you hear a specific sound or a grating noise coming from yours, it might be a sign of a problem. If you hear a loud grinding noise, it indicates a portion of the heater has come loose. This might potentially indicate a problem with the blower wheel.

5. Faulty Ducts

The ductwork may be the reason that your heater is not working properly. It’s a big job to make sure the ducting is correctly built and installed. Unfortunately, many installers choose to scrimp on duct sizing and installation. In such a case, call a professional for the services of ducts.

It is normal for heaters to develop problems, and the majority of them are self-detectable. If the room heater or blower isn’t operating at all, you’ll need to call a specialist. In this case, Priority Heating & air services are available at your doorstep. Call today at (334) 297-9820

What is The Most Energy Efficient Heating System?

Home heating is a significant concern in neighborhoods where temperatures infrequently plunge under zero during the frosty winter months. Heating costs can easily take nearly half of an ordinary household’s energy requirements, making energy efficiency a crucial purpose for those looking to save home energy costs.

Also, if you are in the market for a new residential heating system, you have numerous alternatives for obtaining remarkably efficient furnace systems. However, to get the best and the most energy-efficient heating system, you can take expert suggestions from furnace service Phenix city professionals.

Why is There a Need For a Highly Efficient System?

The most obvious reason to have a high-efficiency heating system is that it will cost considerably less to maintain than a lower-efficiency version. High-efficiency devices can frequently reduce recurring costs by half or more, with the most efficient energy system types reducing expenditures by up to 70%. Even if it is more pricey at first, a more effective system can result in significant savings in the long run.

Heat Pumps: The most effective heating system.

Heat pumps are the ideal option for homes looking for the most energy-efficient heating system possible. They operate on the proposition of generating heat and moving it from one location to another in winters while eliminating heat from your house to offer cooling in the summer season.

  • Air-source Heat Pumps
    Air-source heat pumps absorb and distribute heat from the air around the device. When cooling, the devices use the refrigerant’s heat-exchange characteristics to extract heat from the air all around the interior air handler/evaporator coil and move it outside, where it gets discharged into the outdoor atmosphere. Also, when heating, the coolant absorbs heat from the outside air and transports it inside your home. Heat pumps can collect heat even from colder outdoor air, but their performance plummets when conditions fall below 32 degrees.

  • Geothermal Pumps
    Geothermal systems function similarly, except that they collect and release heat from the ground outside your house or a surrounding body of water. The circuit is a series of tubes buried many feet below the ground, bored very deep in a horizontal loop system, or immersed in a water source. Even a few meters deep, temperatures range from 45 to 60 degrees Fahrenheit all year. Water or a refrigerant mixture cycles around the loop, absorbing or releasing heat as needed. Geothermal heat pumps are the most energy-efficient method of heating.They can reduce heating expenditures by up to 70%. They are also incredibly safe and environmentally pleasant to use, just like other forms of heat pumps. The initial cost in a geothermal system may be larger than other forms of heating systems, and digging holes and ditches in your yard for the insertion of ground loop pipes will be required.If you are lately looking for a reputed HVAC company for your installation, maintenance, or heater repair in Phenix City, Priority Heating & Air can be your go-to place. At Priority Heating & Air, we are an expert HVAC company, and our experts can readily help you save money on your heating services. To know more, call us at (334) 297-9820.