Blog

Heater Not Working? Here’s How To Troubleshoot At Home

In case you’re wondering why your heater isn’t working, there can be a dozen reasons behind it. The reasons can range from a dirty air filter to clogged drain lines. Having warmth is essential in the cold climate of Arizona, and if your heater isn’t working, then it can get tough for you.

However, we are here to sort out your troubleshooting queries and help you with all your heater troubles! Keep reading to find out how to troubleshoot at home!

  • Check the Air Filters: If your furnace has a dirty air filter and is clogged with dirt, dust, and debris, then your furnace will stop blowing hot air. It will also stop working if the heat exchanger overheats at one point in time. It can also lead your furnace to increase electricity costs and can cause your furnace to run less efficiently.

You should replace your furnace’s air filters at least once in 90 days. Also, make sure to check them regularly if you have pets or live in a dusty area.

  • Clean the Drain Lines: It often happens in the heating season that your furnace releases and drains off a lot of water. However, if your condensate lines or drain pipes are filled with dirt and dust, the water can mix and result in slime, which blocks the airflow. To resolve this issue, try cleaning your drain lines thoroughly.
  • Check your Thermostat: Often, it’s your thermostat that is at fault. Newer models sometimes have thermostats that are sensitive to the slightest touch, altering the temperature. So, before calling in the HVAC professionals, check your thermostat and make sure that it’s correctly set.
  • Check the Gas Supply: If you have a furnace that is an older model, then it runs on gas. So, before looking for anything else, check your furnace’s gas levels. Locate the handle to the back of the furnace and see if enough gas is there. If not, then it’s time for a refill or to call the gas company.
  • Check the Ducts and Vents: If some parts of your house are getting heated while some aren’t, then check out your ductwork and ventilation. Also, check pipelines to ensure that none of them is blocked and isn’t restricting the airflow. If there are any leaks in the ducts or pipes, seal them off or call an HVAC technician to install new ducts.

These reasons are mostly behind your heater not working or not being able to heat. Apart from these, check the electrical wiring of your furnace, refrigerant levels, dirty burners or flame sensors, et cetera.

If you’re still facing trouble with your furnace and if it’s still not working, then you need to contact the best furnace service in Phenix City team, Priority Indoor Comfort. Also, we’re there 24*7 to keep your heater in top-notch condition! If you wish to make a booking/consultation, contact us on (334) 297-9820. 

Signs You Will See Without An HVAC Service

Your HVAC is your savior, provided you also save it by servicing it on time. For enjoying the summer fruits and long days with your family, you must consider your air conditioner as something that also needs care.

Regular HVAC servicing is very vital for long-lasting and quality cooling and heating. One can save money by not getting it serviced, but it will show the results sooner. Here is the list of some.

  • Higher Utility Bills

When you realize your electricity meter is going higher, your HVAC will make you sweat. A disrupted air conditioner will raise the electricity bill more than a servicing visit cost. Eventually, you will be dispensing money for the discomfort rather than the comfort.

  • Poor Quality Air

Ventilating the cooler air is not the only purpose your air conditioner serves. In addition, it also decongests the contaminants and odors to make you enjoy it to your fullest. Keeping your indoor air quality at a desirable level is not an added advantage but a necessity for healthy living.

It becomes more significant when you have an allergic or asthmatic person at your residence. If you have such vulnerable cases at home, it is prescribed to do a web search for HVAC service near me.

  • Unpleasant Noise

An AC is making disturbing noise while running and is asking for a service person’s arrival. An excellent sleek sound is understandable when you switch it on, but any other startling sound is something that should concern you.

  • Internal Breakdown

Your appliance is performing with the collective help of the system devices running inside the metal body you see. They might not be visible to you while working, but they are the ones responsible for the cooling you receive.

If you do not provide them with the required consideration they deserve, they will no longer hold the system to render the services expected on their end as well.

  • Low Cooling

Cooling the hot summer air is why you bought your device. There may come a day when you will not get this vital service during a sizzling hot summer day and left with frustration instead of cooling. If you do not wish to witness any such day, you better get your AC served by a professional.

  • More Frequent Repairs

Imagine saving the money on the repairs by discomforting yourself and your family and eventually spending a way higher amount on a giant servicing and repairing. The ignored services will sooner collectively empty your pocket in a single go. Simply, it will wash out all the advantages reaped so far.

To avoid this situation, regular servicing your air conditioner is all you can perform. Though it is difficult to get a competent air conditioner service provider for your home cooling and heating installation in Phenix city has a range of qualified professionals.

We at Priority Indoor Comfort are always ready to assist you for your ease. Call us at 334-297-9820.

How Much Time Does a Furnace Take to Get Installed?

Installation of a furnace ranges from high-end places to some highly crowded places. You can have a fair estimate on how long the furnace installation will take by looking at the enormity of the place.

Some of the Most Common Places for an Installation Are:

● Basements
● Attics
● Laundry rooms
● Garages
● Factories

Factors that Show How Much Time an Installation Requires:

There are a variety of factors that highly affect the installation of a furnace and decides on how long is it going to take for the same:

  • The Size of the Building
    This factor will primarily regulate the size of the furnace, which will further regulate the time taken to install the furnace. The larger the area, the lengthier the time.
  • The Kind of Installation Which is Required
    The kind of furnace that is to be installed also highly determines the time that the entire installation process will take. For example, if an air conditioner needs to be installed at your residence, the time consumed will be extremely minimal. But, if a centrally located air conditioner needs to be installed in a restaurant, you can take professional help from Heater installation Phenix city.
  • The Kind of Unit Which is Required
    This factor is a continuation of the above. In this case, if the unit is pre-installed, the time consumed would be very minimal compared to the installation of both; the furnace and the unit.
  • The Location of the Installation
    As mentioned, this factor will make or break the time you spend installing the furnace. In this case, the type of furnace installed, natural gas, oil, electric, propane, also makes a big difference. It is also important to know what location complies best with the kind of furnace.
  • The Time Frame for a Furnace Installation Ranges from 4-8 Hours
    If you are looking to install a furnace at your home, you need not worry about spending an entire day doing that. Simply 4-8 hours can have your work be smoothly completed.
    Nevertheless, installing a furnace may be a tedious and complex task as it might want you to sweat a little extra on that gas line, duct line, or electricity supply.
    Now, if you are looking to install a furnace in a much larger space, for example, a factory, it is naturally going to take longer. The timings for that vary from 4-10 hours depending on the complexity of the additional products that need to be installed to fit a furnace successfully.

How and When Would a Furnace be Required to be Re-Installed or Replaced?

You are required to replace a furnace only in case of any failure in the duct system, which is not usually happening in small spaces like a residence. Nevertheless, if you make it to the odds, you need not worry.

Heater installation Phenix city will help you replace or install a brand-new furnace and will take much less time. It would have taken even less time, but re-installing a new duct system might be a little flustering.

You can contact the relevant HVAC service near me to experience a smooth furnace installation process. You can also visit the Priority Indoor Comfort services. You can also experience a tip-of-the-finger service by calling (334) 297-9820.

5 Common Reasons The Heater Stopped Working

The heater is one of the most important components in your home during the winter. However, if you regularly put off maintenance and repair for an extended period, your heater may fail when you need it the most.

Even if you keep your appliances in good working order throughout the year, they are still prone to wear and tear. It’s the same with a heater, and we’ve all had problems with our heating systems at some point. The days are short, and the nights are getting longer. The winter season is here! The requirement for a properly functioning heater has become more apparent as the temperature has gradually dropped.

If your heater is not working properly, these could be the possible reasons:

1. Poor Airflow

Poor airflow or inadequate heat are two of the most prevalent heater issues. If your heater or blower isn’t blowing air as efficiently as it previously did, it might be due to a blocked or filthy filter. If this problem or the filter is not examined or left in its current state, the limit switch may be damaged. Replacing the limit switch after that can be costly. Thus it is recommended that you check the filter regularly and clean it as needed. Poor airflow and the need for repairs can be avoided with regular maintenance.

2. Faulty Thermostat

Thermostats are essential components of all types of room heaters. They are not only significant, but they are also necessary. It may be broken if your thermostat doesn’t switch on or adjust the heat mode. This can be a source of concern and should be investigated as soon as possible with expert assistance. It can be possible that you have not installed it properly. You should call a professional for heater repair in Phenix City in such a case.

3. Constant Blowing

Constant blowing is one of the most prevalent heater issues. A faulty limit switch might be the cause of your heater’s blower running continuously without switching off. It’s important to note that the blower should never run constantly and be switched off now and then. If this is not the case, get a furnace service in Phenix City.

4. Noise from the Heater

The majority of heater models on the market nowadays are silent and do not produce any noise. As a result, if you hear a specific sound or a grating noise coming from yours, it might be a sign of a problem. If you hear a loud grinding noise, it indicates a portion of the heater has come loose. This might potentially indicate a problem with the blower wheel.

5. Faulty Ducts

The ductwork may be the reason that your heater is not working properly. It’s a big job to make sure the ducting is correctly built and installed. Unfortunately, many installers choose to scrimp on duct sizing and installation. In such a case, call a professional for the services of ducts.

It is normal for heaters to develop problems, and the majority of them are self-detectable. If the room heater or blower isn’t operating at all, you’ll need to call a specialist. In this case, Priority Indoor Comfort services are available at your doorstep. Call today at (334) 297-9820

What is The Most Energy Efficient Heating System?

Home heating is a significant concern in neighborhoods where temperatures infrequently plunge under zero during the frosty winter months. Heating costs can easily take nearly half of an ordinary household’s energy requirements, making energy efficiency a crucial purpose for those looking to save home energy costs.

Also, if you are in the market for a new residential heating system, you have numerous alternatives for obtaining remarkably efficient furnace systems. However, to get the best and the most energy-efficient heating system, you can take expert suggestions from furnace service Phenix city professionals.

Why is There a Need For a Highly Efficient System?

The most obvious reason to have a high-efficiency heating system is that it will cost considerably less to maintain than a lower-efficiency version. High-efficiency devices can frequently reduce recurring costs by half or more, with the most efficient energy system types reducing expenditures by up to 70%. Even if it is more pricey at first, a more effective system can result in significant savings in the long run.

Heat Pumps: The most effective heating system.

Heat pumps are the ideal option for homes looking for the most energy-efficient heating system possible. They operate on the proposition of generating heat and moving it from one location to another in winters while eliminating heat from your house to offer cooling in the summer season.

    • Air-source Heat Pumps
      Air-source heat pumps absorb and distribute heat from the air around the device. When cooling, the devices use the refrigerant’s heat-exchange characteristics to extract heat from the air all around the interior air handler/evaporator coil and move it outside, where it gets discharged into the outdoor atmosphere. Also, when heating, the coolant absorbs heat from the outside air and transports it inside your home. Heat pumps can collect heat even from colder outdoor air, but their performance plummets when conditions fall below 32 degrees.
  • Geothermal Pumps
    Geothermal systems function similarly, except that they collect and release heat from the ground outside your house or a surrounding body of water. The circuit is a series of tubes buried many feet below the ground, bored very deep in a horizontal loop system, or immersed in a water source. Even a few meters deep, temperatures range from 45 to 60 degrees Fahrenheit all year. Water or a refrigerant mixture cycles around the loop, absorbing or releasing heat as needed. Geothermal heat pumps are the most energy-efficient method of heating.They can reduce heating expenditures by up to 70%. They are also incredibly safe and environmentally pleasant to use, just like other forms of heat pumps. The initial cost in a geothermal system may be larger than other forms of heating systems, and digging holes and ditches in your yard for the insertion of ground loop pipes will be required.If you are lately looking for a reputed HVAC company for your installation, maintenance, or heater repair in Phenix City, Priority Indoor Comfort can be your go-to place. At Priority Indoor Comfort, we are an expert HVAC company, and our experts can readily help you save money on your heating services. To know more, call us at (334) 297-9820.

How Do You Know What Kind Of Furnace Do You Have?

Furnaces are age-old heating units that have been serving most American households during winters. All thanks to their low operating noise, high energy efficiency, and long lifespans. In addition, furnaces can be easily installed in every type of house.

However, many homeowners are not aware of the type of furnace installed. That’s right; a furnace can be of various types depending on the energy source. If you are not sure about the type of furnace at your home, you might consult a professional heater installation in Phenix City.

Meanwhile, here is a little guide on the three major types of furnaces available in the market.

3 Different Types of Furnaces

  • Gas Furnace
    The most common type of furnace you can find in houses is the gas furnace. Also known as a natural gas furnace, this heating unit uses gas coming from the municipal line.
    The furnace is equipped with gas jets that operate along the burner ignite to create the hot combustion gas. This eventually raises the temperature of the air, which is then circulated in the house by the fans. Gas furnaces are pretty effective at creating and distributing heating evenly and do not cost much to run. The primary reason behind its low operating cost is the low prices of gas compared to other fuels.
    However, if you experience cold spots much often, you might need to contact a professional HVAC service near me.
  • Oil Furnace
    Not every household can have access to natural gas pipelines. In such cases, you might have an oil furnace. If you are situated in cold environments such as the northeastern United States, you most probably have an oil furnace. As the name suggests, oil furnaces use oil as a fuel to produce heat.
    However, keep in mind that oil furnaces are less energy-efficient than gas furnaces. A typical AFUE rating for oil furnaces is around 80-90 percent, whereas, for gas furnaces, it is about 88-98 percent.
  • Electric Furnace
    If you don’t have a natural gas line connected to your house, you can contact the heater installation in Phenix City for an electric furnace. This heating system is an electrically powered furnace in which electricity is converted into heat and transferred to the air. Electric furnaces are also quite inexpensive and compact as compared to other furnaces, making them easy to fit into small living spaces as well. However, like oil furnaces, electric furnaces are usually a lot less efficient than gas furnaces. Nevertheless, they can be a perfect fit for many households depending on the scenario.
    Heat pumps emerge as a great alternative to furnaces. This HVAC unit also runs on electricity and can heat and cool your home. If you are located in a mildly cold region, you can enjoy warm and comfortable winters with a heat pump alone!

So, if you think you need a new furnace or a replacement, you can trust us. We provide the best heating installation, service, replacement, and HVAC repair near me.

Call us today at (334) 297-9820 to schedule a service!

How to Read Your Furnace Model Number?

We often buy things without bothering much about the model number or a serial number of that thing. But have you ever wondered what secrets or information the model number can tell about your product? When it comes to furnaces, it becomes important to check the model number so that you can keep track of all the information on it. The model number of a furnace can vary according to the company or the type of the furnace. The model number can also determine a lot of information about the product which we might have missed during the purchase of the product.

The model number of a furnace is divided into different parts which can tell different things about your product. However, the model numbers can be encoded differently by different companies which can tell you different things about the product. Generally, the serial number can be like G26Q3/4-100-1 or it can be a ten-digit number like 1404123456.

These Things Can be Easily Determined Using the Model Number –

  1. Series Number
    The first three digits, that is G26 in the above example can tell us about the series number of the product. G here stands for Gas and 26 means 26th unit produced in the lot.
  2. Unit capacity or Size
    The next three digits, that is Q3/4 can tell you about the capacity and size of your furnace unit. Q3/4 here refers to 3-ton or 4-ton unit capacity. There is 400 CFM(cubic feet per minute) of airflow per ton. This means that the capability of the air movement of a particular unit is 1200/1600 CFM.
  3. Age of the Unit
    Some furnace models of a particular company like Goodman can also tell you about the age of your unit by telling in which month and year the unit was manufactured. For example in model number 1404123456, the first four digits, that is 1404 tells you that this unit was manufactured in April 2014. Some companies like Lennox tell you about age by using alphabets where A stands for January, B stands for February, and so on.
  4. BTU Rating
    BTU (British Thermal Unit) rating is the rating in thousands that determines the efficiency of the unit. In the above example, 100 refers to the BTU rating which is 100,000. This furnace has an input of 100,000 BTUs. Output depends upon the efficiency of the furnace. If this furnace is 90% efficient so the output will be 90,000 BTUs.
  5. Revision (Dash) Number
    The last number shows the number of revisions that have been made to the model series. This number indicates the revision has occurred to the model series not requiring a series change. This revision number is very important in repair part identification.

Sometimes, model numbers can also tell you a lot of things about the things we purchase but we didn’t pay attention to while purchasing. Different types of furnaces from different companies have different data on their model or serial numbers. If we know how to properly read the serial number of the furnace, we can easily determine many things about it by ourselves.

You can also check out Priority Indoor Comfort for getting the cheapest heater repair in Phenix City. They also provide the best furnace repair and service in Phenix City. Their team is available 24×7 and they have professionals who are experts in their fields and provide the best service.

How Often Do You Have To Clean Your Outside AC Unit?

Your air conditioner should be able to adequately transfer heat from within your house to the outside to perform successfully. Most of the time our inside unit of AC is fine but the problem arises with the outside HVAC unit. The outdoor heat pump unit contains the compressor and condenser. Like the radiator in a car, the condenser fins let the system dissipate heat more efficiently.

Cleaning an outside air conditioner isn’t difficult, but the time and work you put in will be well worth it in terms of improved energy efficiency and convenience for your family, whether it’s winter or summer. Coils are the main part that is needed to be cleaned. Most owners only need to do this twice a year: once before the summer season begins and once before the winter season. So, look for an AC contractor in Phenix City.

Importance of Cleaning The Coils

Dirty evaporator and condenser coils can increase the energy consumption of your AC Unit by more than 30%. Lower heat transfer efficiency can also cause poor cooling performance, frozen evaporator coils, and compressor overheating.

How To Keep Your Coils Away From Dirt

It’s crucial to inspect the air filter at least once a month and change it as needed to maintain the evaporator coils clean. A clogged air filter can cause dust and debris to collect on the evaporator rather than the air filter, and it can also limit airflow in the system, causing other issues.

Keep a two-foot radius surrounding the condenser unit clear of vegetation and debris, such as trash, long grass, plants, and overhanging trees or shrubs, to keep the condenser coils clean. Large material should be removed because it falls into the condenser coils, large material should be removed, and clippings should be discharged away from the condenser when mowing.

How To Clean The Coils

The evaporator and condenser coil fins are extremely sensitive and can be bent with a small amount of force. The rest of the cleaning should be left to an air conditioning contractor, who will clean the coils as part of a routine maintenance visit. Air conditioning maintenance should ideally be done twice a year, however for certain systems, once would be sufficient.

The condenser coils are often cleaned between visits by removing big debris and washing the coils with a hose after turning off the facility. Because the evaporator is often difficult to reach, it should be cleaned by a specialist. So, look for air conditioner installation in Phenix City.

Why Hire A Professional?

There are things only a professional can do. With the necessary credentials and qualifications, an expert will be in a far better position to address or resolve any issues that arise during the cleaning process, as well as nip any potential issues in the bud.

At Priority Indoor Comfort, we offer high-quality services at reasonable prices to our consumers. you’ll contact us by calling at (334) 297-9820.

Do Dirty Air Filters Affect The Performance of An AC?

Air conditioning systems are vital to any household, in any season. While many people invest in air conditioners only for combatting the heat during summers, these units serve so much more functions other than that. With air pollution increasing at unbelievable levels, an AC is the layer of protection that blows clean and filtered air inside your home. Air filters, especially, are the central components that serve the function of preventing dust and debris from entering your home.

Obviously, when such a pivotal component of the air conditioner is not in its best condition, problems ensue. From AC failures to improper air flow, there are numerous problems caused due to dirty air filters. When there are some issues with your air conditioning unit, it is for the best if you hire a professional from an air conditioner contractor in Phenix City and have it serviced.

Take a Look at Some of The Common Problems That Occur Due to Dirty and Clogged Air Filters

  • Polluted Air

As the AC preserves the quality of air that enters your home, clogged filters play a major role in disrupting this. Due to their improper functioning, debris blocks the way of airflow. Sometimes, the dirty filters pave the way for the spread of air-borne diseases. All this leads to the quality of air getting degraded, which will lead to health issues for the members of the household.

  • Damaged Coils

Due to the improper flow of air, the evaporator coil will begin to malfunction. Also, other coils that play a key role in the functioning of the air conditioner will be damaged. This will lead to problems like water leakage and no cooling. In some severe cases of wreckage, the coils will need replacement. To avoid such problems, you can schedule an AC repair in Phenix City with us and resolve the issue at an early stage.

  • System Failure

With the dirt clogging in air filters, the inner parts and ducts will also get sedimented with dust eventually. Sometimes, the above-mentioned coils could also get damaged forever due to overwork and heat. So, there is a possibility for the failure of the system to happen. And all this just because of dirty air filters. To avoid any costly repairs or replacements, clean these filters periodically.

  • Reduced Efficiency

When the air filters in your AC are dirty, the unit struggles to function normally. As the air conditioning system strains hard to maintain the temperature set by the thermostat, the energy consumption goes up. The efficiency of the unit drops down and the energy bills spike significantly. If you are looking to replace some parts of your AC, you can contact an air conditioner contractor in Phenix City and know more.

The best solution to all these problems is the frequent cleaning of air filters. Also, you can schedule a tune-up or an AC repair in Phenix City with us. Get in touch with us by giving a call to (334) 297-9820 and access the best services!

This Should Be Your Tune-up Schedule For Air Conditioners

If you live somewhere warm in the United States during the summertime, you know how important air conditioning is. No matter how hot it is outside, air conditioning enables the air inside a home to be kept cool. Your air conditioning cable is geared up of a variety of blades, wires, tubes, and other things that may wear out over time and reduce the effectiveness of your system. Therefore they must be checked often.

For homes, this involves scheduling an AC tune-up with a company of AC repair in Phenix City. It is basic maintenance for any system and will keep your air conditioner running well for many years. How many times should you have your air conditioner tested and tuned up as a homeowner? Let’s figure it out.

How Often Will Your AC Need a Tune-Up?

The HVAC professionals recommend an annual checkup for most households. You don’t want anybody looking at your air conditioner; you want a professional company of AC tune-up in Phenix city to inspect it. The yearly inspection should occur for most households during the spring months when the temperatures start to rise outside.

During an AC checkup, the expert will examine all parts of your air conditioner and check the status of any things that need to be replaced or fixed, and in most cases, the repairs will be done on the spot.
The technician of AC repair in Phenix City will also check any components as required. They will inform you of any future projects that may be required, as well as maintenance suggestions to keep your machine running well. After the HVAC technician has finished repairing your unit, you can be assured that it will be ready for the summer months.

Tune-ups For Older Systems

Most householders, as previously said, require an annual inspection, but that is not always the situation. It’s a good idea to get your system examined twice or even three times a year if you use an outdated unit or if someone in your family has respiratory difficulties. On the other hand, if you live in a house where the air conditioner is only used occasionally, you might be able to get away with an inspection every other year.

Signs That Your AC Needs a Tune-up –

  • Noises

As the mechanics work harder to cool down the house, the machine squeals loudly. The noise would be minimal if the device were working properly. The irritating clatter is because the machine is not operating adequately, forcing it to work harder to compensate for the lack of performance.

  • In-efficiency

The unit’s underperformance is another strong indicator that it needs to be improved. It may take a long time for the house to cool down, or it may never reach the ideal temperature. The AC unit probably needs a tune-up if the variation in cooling time is significant enough for the homeowner to notice.

We can help you get a better deal on AC tune-ups and repairs. To get the best AC tune-up in Phenix City, call us at (334)-297-9820.