AC Compressor Failure: Causes And Prevention

The compressor is considered the heart of the Air conditioner for a reason. The compressor compresses the refrigerant gas and pumps it into the system. This process eliminates the heat and humidity from the air, resulting in a cooling effect in your home. 

When the compressor fails, it will affect the whole system. However, the good news is that with proper care and routine maintenance with a certified AC tune-up in Phenix city, the causes of AC compressors can be prevented.

As the leading service provider of air conditioner installation, Phenix city Priority Heating and Air follow and implement precautionary measures to prevent future complications in your compressor during our periodic maintenance.

Here we have mentioned some of the causes of AC compressor failure that can be prevented with simple measures.

Dirty Condenser Coils

Different parts of your air conditioner, especially the condenser coils, tend to build up dirt, dust, and debris. It will block the expulsion of hot air from the coil and makes the system work harder to reach the set temperature level. The trapped heat and pressure within the AC lead to overheating of the compressor.

Preventative Tip – Be sure to clean the unit at the change of every season, which will significantly reduce the impact of the climate on your AC compressor.

Electrical Damage

Like any other electrical system, your Air conditioner also has electoral issues that adversely affect the compressor leading to its failure. The electrical damage causes the acid fluid in the system to accumulate, damaging the wiring and burnout the entire system. Hence if you notice a sudden shutdown of AC, it might be irreparable damage to the compressor and other important components.

Preventative tip – Set periodic inspections to detect the electrical faults, which will allow for timely repairs to the electrical problems. It will help you to avoid major and expensive faults in the future.


The compressors are usually located outside the homes, exposing them easily to contaminants from bacteria and leaves to debris and bird dropping. These particles will enter the compressor system and cause malfunction.

Preventative Tip – IAs the outer unit of the AC system is placed outside, it is not possible to prevent the contaminants; however, you can remove them at regular intervals to avoid overheating and pressure in the system.

Low Refrigerant Charge

It is important to maintain the optimal refrigerant level all the time. Sometimes, the suction line will develop holes and cracks over time, causing refrigerant leakage, making the AC work harder to maintain the temperature and keep producing cool air. The excess pressure will result in compression failure.

There are also chances for compression failure due to overcharging of the refrigerant, causing detriments similar to the low charge. 

Preventative Tip – Following regular maintenance will help you detect these leaks easily and early. Expert professionals will help you replace the lines once they find their defects or determine them as they age.

Final Thoughts

When your AC is not working, the last thing you want to hear from the technician is that your compressor has failed. To ensure that your AC provides you with fresh and cool air and spare the unnecessary stress, invest in the best air conditioning service and AC tune-up, Phenix city. 

Please schedule your appointment with us to get the best ac repair and air conditioner installation in Phenix City.

AC Not Cooling? Know the 6 Reasons and How to Fix AC

Have you ever wondered, ‘Why is my system running but not cooling the house?’ The situation is normal, and understanding the reasons behind the problem will keep you prepared when they strike suddenly.

There are different reasons why your air conditioner can’t drop the temperature in your home, from simple issues like thermostat settings to complex problems that demand replacements.

Here are the six common causes and the steps to fix them before calling an ac contractor, Phenix City.

Clogging Air Filters

The filter in your AC traps the airborne particles that enter through the ductwork and prevent further damage. When it gets clogged, the evaporator coil will freeze and loses its ability to cool down the Air.

How to Fix it – Be sure to clean the filters at least once every month to get cool Air without exciting the electric bill.

The Refrigerant is Leaking or Low

The refrigerant in AC transfers heat from the indoor space to the outdoor. When the refrigerant circulates together with the Air, your home will be filled with cool Air. If the refrigerant level is too low, the system will find it difficult to provide a cooling effect in your home.

How to fix it – The condition requires the attention of professionals. The leakage might cause a poisoning effect in the environment. At Priority, the best air conditioner contractor, Phenix City, our technicians ensure to fix your problems.

Broken or Damaged Thermostat

A thermostat detects your home’s room temperature and indicates the compressor to start or stop the cooling effect. If you have installed your system with a faulty thermostat, it will not get you cooling Air.

How to fix it – You can inspect and switch the fan setting to the auto option. Also, ensure the thermostat is set to the ‘cool ‘option and not on ‘heat’ before calling the technicians.

Dirty Coils

If your coils have a build-up of dirt on them, it will be difficult for your AC system to transfer the heat. It will lower the ability of AC to provide cool Air, and the Air will be warmer than it should be.

How to fix it – Visually inspect the outdoor coils at regular intervals for grass, dirt, and yard debris and gently clean the unit. 

Malfunctioning Compressor

A compressor is one of the important parts of an AC system. When the compressor gets damaged, it will affect the whole process of the cooling cycle, and your AC will not be able to cool down your room.

How to fix it – The damaged compressor is a complicated issue, which is mostly irreparable and requires replacement. 

Undersized Air Conditioner

The air conditioner is designed with size, according to the cooling ability they can provide us. If your AC is not cooling your home properly, it might be too small or too big, so it struggles to keep you cool for a long time.

How to fix it You can try to add a ductless unit or replace the system with one with a proper size that fits your needs.

Final Thoughts

Just because your system isn’t cooling doesn’t mean you have to go for a replacement or upgrade option. With reliable support from an air conditioner contractor in Phenix City, most problems can be fixed by yourself. Priority heating and Air, the leading AC contractor in Phenix City, provides a holistic approach to our customers. 

Checklist for AC Tune-up

It’s essential to have your AC unit tuned up if you want it to run better. To enjoy pollution-free warm or cold air, you need to keep your HVAC equipment in good working order. Many folks may not consider tuning up their HVAC system until it breaks down. A well-kept HVAC system lasts longer. As a result, regular tune-ups with skilled HVAC companies should be considered.

What Exactly Does an HVAC Tune-Up Entail?

  • HVAC Cleaning: You don’t want your air conditioning system to break down unexpectedly. You should arrange an HVAC service to tune up your machines to ensure that they function efficiently. A specialist like air conditioner installation Phenix City would clean, examine, and service the HVAC system during a regular tune-up.

  • HVAC Cleaning: Cleaning the HVAC system is one of the most important aspects of an HVAC tune-up. Even though you should be vigilant in cleaning the filters regularly, it is recommended that you hire a professional to complete a full cleaning.

  • HVAC Inspection: When you call for an AC tune-up in Phenix City, one of the first things any professional will do is conduct an inspection. Based on his analysis, he might decide on the duration and approximate cost of the process. 

The Following Are Some of The Most Common Tune-Up Services:

  • Electrical connections are inspected and adjusted after the wiring has been checked.
  • Lubrication of the furnace’s blower bearings and other mechanical components.
  • The thermostat should be inspected and re-calibrated to ensure synchronization.
  • Heat exchangers, pressure pumps, and fuel operators are all inspected.
  • Fuel lines for oil, coal, natural gas, and other furnaces are inspected.
  • Carbon monoxide detectors, flame detectors, and other safety measures are checked.
  • Connections to ducting or ventilation units are inspected and tuned.
  • Airflow and filter inspection is done. 

Factors That Impact The Cost of an HVAC Tune-Up

Knowing the many elements that could increase or decrease the overall cost of the HVAC tune-up is an integral part of arranging an AC tune-up in Phenix City. A few aspects that influence the final cost are listed below:

  • Prior Maintenance Session Frequency: If you haven’t scheduled any maintenance visits, your system will likely have various faults. So, you may have to pay more to remedy the problems.
  • The HVAC System’s Age: As the HVAC system gets older, it may become inefficient and require more maintenance.
  • The House’s Design and Area Coverage: A more significant area or a distinctive design may raise the overall service cost.
  • Ductwork Complexity: More intricate Ductwork may necessitate more effort and tools. As a result, it will dramatically increase the cost.

How Long Does it Take to Have an HVAC Tune-Up?

The time taken depends on your unit’s settings. You’ll need an extra 30 to 45 minutes to tune up your unit if the refrigerant is required. You should get your HVAC systems maintained by a competent HVAC company to take excellent care of your heating and cooling system.

Don’t worry if you’ve already turned on your air conditioner for the season; it’s never too late to arrange a tune-up to keep your system running well during the Phenix City heat! To place an appointment with one of our certified experts for air conditioner installation in Phenix City, call Priority Heating & Air immediately at 334-297-9820 or drop us a mail here. 

Is It Advisable to Keep Your AC On to Save Money?

The majority of homeowners are still looking for ways to save money on their energy bills. Turning off your AC when you’re not at home isn’t an excellent method to save money. It can cause your home’s humidity, heat, and moisture levels to rise. Mold spores, uncomfortable temperatures when you return, and many other problems could ensue.

Why is it Hazardous to Turn Off Your Air Conditioner?

The purpose of your HVAC system is to cool the air in your home. It also dehumidifies the air to ensure adequate ventilation and comfort. As a result, shutting it off altogether causes humidity levels to climb by up to 60%. This draws insect infestations and makes your home suitable for mold growth. According to experts like the air conditioner contractor in Phenix City, the humidity level in your HVAC system should be set between 45 and 55 percent.

When is it Advisable to Turn Off Your Air Conditioner?

  • If You’re Going to Open The Windows: It’s essential to open windows in the spring to improve the indoor air quality. Your home has primarily been recirculating the same stale air for six months. Professionals like AC repair in Phenix City advise that the fresh air can be distributed throughout the house by opening the windows.

  • If You’re Planning to Keep it Off For a Long Time: More than 4 hours is considered a lengthy period. When you’re at work or the weather is pleasant enough that your home doesn’t require air conditioning, it’s OK to turn it off.

  • While You’re Away: Turn your thermostat up to 7-10 degrees if you’re leaving the house for several hours. It controls the indoor humidity level, ensuring that your home is comfortable when you return. No one wants to return home to a stifling, humid environment.

  • Pro Tip: With a programmable thermostat, you can customize the temperature in your home to whatever you want it to be. You won’t have to remember to adjust the thermostat when you leave. You won’t have to cool a house that isn’t occupied.

How Can One Keep The AC Running Efficiently?

  • While you don’t want to turn your air conditioner off entirely during the summer months, you also don’t want it running full blast. After all, air conditioners consume a lot of energy and account for a significant portion of your energy cost.
  • The ideal strategy is to set your air conditioner to around 78 degrees (F) when not home. The specialists like AC repair in Phenix City recommend this number because it achieves a nice mix between keeping your house comfortable and conserving energy.
  • Your AC works in cycles, releasing air 15-20 degrees cooler than the ambient temperature. After then, your thermostat will determine whether or not more cycles are required to attain the temperature set on your thermostat. Because 78 degrees is a relatively warm setting, your air conditioner should realize that no other processes are needed quickly.

Contact the HVAC experts at Priority Heating & Air today to learn more about how you can save money on your cooling bills. If you seek an air conditioner contractor in Phenix City, we can help. Call us at 3342979820 or drop us a mail here.


8 Signs That Your Heating System Needs Repair Or Replacement

A heating system is required to keep you warm and safe during the winters. Having a healthy heating system can help you dodge the cold and provide you with good air quality, which will enhance your living standards. A heating system problem may arise at any given time if you do not take care of it properly. Heating systems issues can be fatal and should be addressed immediately. With proper maintenance of your heating system, you can dodge these issues and increase the lifespan of your system. A few indicators for servicing or heater installation Phenix city of your heating system are as follows:

  1. Frequent Changes in Temperature

    If your heating system does not provide adequate heating and needs to be adjusted from time to time, it might indicate that the system needs to be replaced. Old heating systems fail to provide adequate heating throughout the home and must be inspected regularly to avoid heavy maintenance costs.

  2. Unusual Sounds

    If your heating system is making unusual and weird sounds, it is an indication that you require a heater repair in Phenix city immediately. If your heating system is in good condition, it should not produce any weird sounds while operating. These unusual sounds may be the reason for major damages to the heating system and should be fixed immediately.

  3. High Energy Bills

    If not maintained efficiently, an old heating system may not be as energy-efficient as before. Regular maintenance of the heating system can help you keep your energy bills under control. The decreased efficiency indicates that you need heater repair in Phenix City.

  4. Improper Heating

    If your system does not provide you with proper heating throughout your home, you should consider calling an experienced technician to inspect and repair your system. The heating system should maintain the same temperature throughout the house and provide adequate heating.

  5. Mediocre Indoor Air Quality

    If your heating system fails to provide you with enhanced air quality, there may be a problem with the air filters. Clogged filters need to be replaced immediately. Maintaining good air quality is required to keep yourself and your loved ones safe from allergies and other air-borne diseases at all times.

  6. Frequent Repairs

    If your heating system requires frequent repairs every few months, it is an indicator that you should consider replacing your heating system. Frequent heater repair Phenix city indicates that your system might break down at any point. Consider investing in a new appliance rather than spending huge amounts on repairs.

  7. High Condensation Levels

    If your heating system produces high condensation levels in your home, it is time for you to consider a replacement. If your system blows excess moisture, it can lead to other serious issues.

  8. Frequent Cycling

    A heating system should maintain a constant temperature unless there is a temperature shift. If your heating system is frequently cycling itself, you should consult an experienced technician.

You can contact Priority Heating & Air for all your heating system and air conditioner problems. Our team of expert professionals seeks to cater to the needs of all our clients and provide them with top-notch quality services. You can give us a call at (334) 297-9820 or leave an email at [email protected], and our team will get back to you soon.

Heater Not Working? Here’s How To Troubleshoot At Home

In case you’re wondering why your heater isn’t working, there can be a dozen reasons behind it. The reasons can range from a dirty air filter to clogged drain lines. Having warmth is essential in the cold climate of Arizona, and if your heater isn’t working, then it can get tough for you.

However, we are here to sort out your troubleshooting queries and help you with all your heater troubles! Keep reading to find out how to troubleshoot at home!

  • Check the Air Filters: If your furnace has a dirty air filter and is clogged with dirt, dust, and debris, then your furnace will stop blowing hot air. It will also stop working if the heat exchanger overheats at one point in time. It can also lead your furnace to increase electricity costs and can cause your furnace to run less efficiently.

You should replace your furnace’s air filters at least once in 90 days. Also, make sure to check them regularly if you have pets or live in a dusty area.

  • Clean the Drain Lines: It often happens in the heating season that your furnace releases and drains off a lot of water. However, if your condensate lines or drain pipes are filled with dirt and dust, the water can mix and result in slime, which blocks the airflow. To resolve this issue, try cleaning your drain lines thoroughly.
  • Check your Thermostat: Often, it’s your thermostat that is at fault. Newer models sometimes have thermostats that are sensitive to the slightest touch, altering the temperature. So, before calling in the HVAC professionals, check your thermostat and make sure that it’s correctly set.
  • Check the Gas Supply: If you have a furnace that is an older model, then it runs on gas. So, before looking for anything else, check your furnace’s gas levels. Locate the handle to the back of the furnace and see if enough gas is there. If not, then it’s time for a refill or to call the gas company.
  • Check the Ducts and Vents: If some parts of your house are getting heated while some aren’t, then check out your ductwork and ventilation. Also, check pipelines to ensure that none of them is blocked and isn’t restricting the airflow. If there are any leaks in the ducts or pipes, seal them off or call an HVAC technician to install new ducts.

These reasons are mostly behind your heater not working or not being able to heat. Apart from these, check the electrical wiring of your furnace, refrigerant levels, dirty burners or flame sensors, et cetera.

If you’re still facing trouble with your furnace and if it’s still not working, then you need to contact the best furnace service in Phenix City team, Priority Heating & Air. Also, we’re there 24*7 to keep your heater in top-notch condition! If you wish to make a booking/consultation, contact us on (334) 297-9820. 

Signs You Will See Without An HVAC Service

Your HVAC is your savior, provided you also save it by servicing it on time. For enjoying the summer fruits and long days with your family, you must consider your air conditioner as something that also needs care.

Regular HVAC servicing is very vital for long-lasting and quality cooling and heating. One can save money by not getting it serviced, but it will show the results sooner. Here is the list of some.

  • Higher Utility Bills

When you realize your electricity meter is going higher, your HVAC will make you sweat. A disrupted air conditioner will raise the electricity bill more than a servicing visit cost. Eventually, you will be dispensing money for the discomfort rather than the comfort.

  • Poor Quality Air

Ventilating the cooler air is not the only purpose your air conditioner serves. In addition, it also decongests the contaminants and odors to make you enjoy it to your fullest. Keeping your indoor air quality at a desirable level is not an added advantage but a necessity for healthy living.

It becomes more significant when you have an allergic or asthmatic person at your residence. If you have such vulnerable cases at home, it is prescribed to do a web search for HVAC service near me.

  • Unpleasant Noise

An AC is making disturbing noise while running and is asking for a service person’s arrival. An excellent sleek sound is understandable when you switch it on, but any other startling sound is something that should concern you.

  • Internal Breakdown

Your appliance is performing with the collective help of the system devices running inside the metal body you see. They might not be visible to you while working, but they are the ones responsible for the cooling you receive.

If you do not provide them with the required consideration they deserve, they will no longer hold the system to render the services expected on their end as well.

  • Low Cooling

Cooling the hot summer air is why you bought your device. There may come a day when you will not get this vital service during a sizzling hot summer day and left with frustration instead of cooling. If you do not wish to witness any such day, you better get your AC served by a professional.

  • More Frequent Repairs

Imagine saving the money on the repairs by discomforting yourself and your family and eventually spending a way higher amount on a giant servicing and repairing. The ignored services will sooner collectively empty your pocket in a single go. Simply, it will wash out all the advantages reaped so far.

To avoid this situation, regular servicing your air conditioner is all you can perform. Though it is difficult to get a competent air conditioner service provider for your home cooling and heating installation in Phenix city has a range of qualified professionals.

We at Priority Heating and Air are always ready to assist you for your ease. Call us at 334-297-9820.

How Much Time Does a Furnace Take to Get Installed?

Installation of a furnace ranges from high-end places to some highly crowded places. You can have a fair estimate on how long the furnace installation will take by looking at the enormity of the place.

Some of the Most Common Places for an Installation Are:

● Basements
● Attics
● Laundry rooms
● Garages
● Factories

Factors that Show How Much Time an Installation Requires:

There are a variety of factors that highly affect the installation of a furnace and decides on how long is it going to take for the same:

  • The Size of the Building
    This factor will primarily regulate the size of the furnace, which will further regulate the time taken to install the furnace. The larger the area, the lengthier the time.
  • The Kind of Installation Which is Required
    The kind of furnace that is to be installed also highly determines the time that the entire installation process will take. For example, if an air conditioner needs to be installed at your residence, the time consumed will be extremely minimal. But, if a centrally located air conditioner needs to be installed in a restaurant, you can take professional help from Heater installation Phenix city.
  • The Kind of Unit Which is Required
    This factor is a continuation of the above. In this case, if the unit is pre-installed, the time consumed would be very minimal compared to the installation of both; the furnace and the unit.
  • The Location of the Installation
    As mentioned, this factor will make or break the time you spend installing the furnace. In this case, the type of furnace installed, natural gas, oil, electric, propane, also makes a big difference. It is also important to know what location complies best with the kind of furnace.
  • The Time Frame for a Furnace Installation Ranges from 4-8 Hours
    If you are looking to install a furnace at your home, you need not worry about spending an entire day doing that. Simply 4-8 hours can have your work be smoothly completed.
    Nevertheless, installing a furnace may be a tedious and complex task as it might want you to sweat a little extra on that gas line, duct line, or electricity supply.
    Now, if you are looking to install a furnace in a much larger space, for example, a factory, it is naturally going to take longer. The timings for that vary from 4-10 hours depending on the complexity of the additional products that need to be installed to fit a furnace successfully.

How and When Would a Furnace be Required to be Re-Installed or Replaced?

You are required to replace a furnace only in case of any failure in the duct system, which is not usually happening in small spaces like a residence. Nevertheless, if you make it to the odds, you need not worry.

Heater installation Phenix city will help you replace or install a brand-new furnace and will take much less time. It would have taken even less time, but re-installing a new duct system might be a little flustering.

You can contact the relevant HVAC service near me to experience a smooth furnace installation process. You can also visit the Priority Heating and Air services. You can also experience a tip-of-the-finger service by calling (334) 297-9820.

5 Common Reasons The Heater Stopped Working

The heater is one of the most important components in your home during the winter. However, if you regularly put off maintenance and repair for an extended period, your heater may fail when you need it the most.

Even if you keep your appliances in good working order throughout the year, they are still prone to wear and tear. It’s the same with a heater, and we’ve all had problems with our heating systems at some point. The days are short, and the nights are getting longer. The winter season is here! The requirement for a properly functioning heater has become more apparent as the temperature has gradually dropped.

If your heater is not working properly, these could be the possible reasons:

1. Poor Airflow

Poor airflow or inadequate heat are two of the most prevalent heater issues. If your heater or blower isn’t blowing air as efficiently as it previously did, it might be due to a blocked or filthy filter. If this problem or the filter is not examined or left in its current state, the limit switch may be damaged. Replacing the limit switch after that can be costly. Thus it is recommended that you check the filter regularly and clean it as needed. Poor airflow and the need for repairs can be avoided with regular maintenance.

2. Faulty Thermostat

Thermostats are essential components of all types of room heaters. They are not only significant, but they are also necessary. It may be broken if your thermostat doesn’t switch on or adjust the heat mode. This can be a source of concern and should be investigated as soon as possible with expert assistance. It can be possible that you have not installed it properly. You should call a professional for heater repair in Phenix City in such a case.

3. Constant Blowing

Constant blowing is one of the most prevalent heater issues. A faulty limit switch might be the cause of your heater’s blower running continuously without switching off. It’s important to note that the blower should never run constantly and be switched off now and then. If this is not the case, get a furnace service in Phenix City.

4. Noise from the Heater

The majority of heater models on the market nowadays are silent and do not produce any noise. As a result, if you hear a specific sound or a grating noise coming from yours, it might be a sign of a problem. If you hear a loud grinding noise, it indicates a portion of the heater has come loose. This might potentially indicate a problem with the blower wheel.

5. Faulty Ducts

The ductwork may be the reason that your heater is not working properly. It’s a big job to make sure the ducting is correctly built and installed. Unfortunately, many installers choose to scrimp on duct sizing and installation. In such a case, call a professional for the services of ducts.

It is normal for heaters to develop problems, and the majority of them are self-detectable. If the room heater or blower isn’t operating at all, you’ll need to call a specialist. In this case, Priority Heating & air services are available at your doorstep. Call today at (334) 297-9820

What is The Most Energy Efficient Heating System?

Home heating is a significant concern in neighborhoods where temperatures infrequently plunge under zero during the frosty winter months. Heating costs can easily take nearly half of an ordinary household’s energy requirements, making energy efficiency a crucial purpose for those looking to save home energy costs.

Also, if you are in the market for a new residential heating system, you have numerous alternatives for obtaining remarkably efficient furnace systems. However, to get the best and the most energy-efficient heating system, you can take expert suggestions from furnace service Phenix city professionals.

Why is There a Need For a Highly Efficient System?

The most obvious reason to have a high-efficiency heating system is that it will cost considerably less to maintain than a lower-efficiency version. High-efficiency devices can frequently reduce recurring costs by half or more, with the most efficient energy system types reducing expenditures by up to 70%. Even if it is more pricey at first, a more effective system can result in significant savings in the long run.

Heat Pumps: The most effective heating system.

Heat pumps are the ideal option for homes looking for the most energy-efficient heating system possible. They operate on the proposition of generating heat and moving it from one location to another in winters while eliminating heat from your house to offer cooling in the summer season.

  • Air-source Heat Pumps
    Air-source heat pumps absorb and distribute heat from the air around the device. When cooling, the devices use the refrigerant’s heat-exchange characteristics to extract heat from the air all around the interior air handler/evaporator coil and move it outside, where it gets discharged into the outdoor atmosphere. Also, when heating, the coolant absorbs heat from the outside air and transports it inside your home. Heat pumps can collect heat even from colder outdoor air, but their performance plummets when conditions fall below 32 degrees.
  • Geothermal Pumps
    Geothermal systems function similarly, except that they collect and release heat from the ground outside your house or a surrounding body of water. The circuit is a series of tubes buried many feet below the ground, bored very deep in a horizontal loop system, or immersed in a water source. Even a few meters deep, temperatures range from 45 to 60 degrees Fahrenheit all year. Water or a refrigerant mixture cycles around the loop, absorbing or releasing heat as needed. Geothermal heat pumps are the most energy-efficient method of heating.They can reduce heating expenditures by up to 70%. They are also incredibly safe and environmentally pleasant to use, just like other forms of heat pumps. The initial cost in a geothermal system may be larger than other forms of heating systems, and digging holes and ditches in your yard for the insertion of ground loop pipes will be required.If you are lately looking for a reputed HVAC company for your installation, maintenance, or heater repair in Phenix City, Priority Heating & Air can be your go-to place. At Priority Heating & Air, we are an expert HVAC company, and our experts can readily help you save money on your heating services. To know more, call us at (334) 297-9820.